Water cooler, Model M24I, is produced according to the method “Dry Chill”, this means that the water runs through stainless steel pipes which are embedded in an aluminum block. The cold from the aluminum block is then transferred to the steel tubes. This ensures that the water is cooled to 2 °C and a constant flow of clean cold drinking water can be provided. Ready for bottling 24/7 in glass, jugs or whatever you want.
Can produce 24L/h at an input temperature of 10 °C
Our water coolers are a “Buy 2 keep” product, designed to last for 15 years.
Freestanding water cooler made of brushed stainless steel. Fits into any office environment.
Surface, round, with sensor mounted in the top plate. Round drip tray with drains is included.
What needs to be ready before installation
The plinth (base) must be ventilated. All hot air blows down into the plinth (base).
Power: EU 230V female plug in the kitchen cabinet
Water pipe: 3/4” female thread
Kitchen cabinet base tray.
Cooler name: M24i
Item no: M24i
Delivers: filtered chilled water.
Capacity: 24 liters per hour.
Compressor: 1/8 ”HP
Cooling gas: R290
Cooling method: Alublock
Noise: dB 56
VA approved: Yes (Pressure test at Jysk Technologist inst.)
Max water pressure: 5,0 bar
Minimum water pressure: 3.0 bar
Water filter: Yes, QAC8 Activated carbon filter capacity 8000 liters
Weight: 19 kg
Temperature in coolers: adjusted to 2,5 c.
Air shield: Yes
Dimensions: W 24 cm – H 38 cm – D 40 cm with air shield 40 cm deep.
Power consumption: EU plug 230v Max consumption 250 watts 0,23Khw A++