Still water touchless sensor - Surface round faucet - M24i CategoryAll products
Water cooler, Model M24I, is produced according to the method “Dry Chill”, this means that the water runs through stainless steel pipes which are embedded in an aluminum block. The cold from the aluminum block is then transferred to the steel tubes. This ensures that the water is cooled to 2 °C and a constant flow of clean cold drinking water can be provided. Ready for bottling 24/7 in glass, jugs or whatever you want.
Can produce 24L/h at an input temperature of 10 °C
Our water coolers are a “Buy 2 keep” product, designed to last for 15 years.
Surface round with 1 sensor mounted in the tabletop.
Cold still water.
Surface Tap and Touchless
Ø18 mm hole
Table top max thickness 50 mm
6 mm JG hose with insulation (Ice water – boiling water and Sparkling water)
Valve Box incl. power supply 12Vdc or (24Vdc Boiling water)
The surface of the tap is lacquered. And does not tolerate solvents.
Touchless sensor hole Ø41 mm
Cooler name: M24i
Item no: M24i
Delivers: filtered chilled water.
Capacity: 24 liters per hour.
Compressor: 1/8 ”HP
Cooling gas: R600a
Cooling method: Alublock
Noise: dB 56
VA approved: Yes (Pressure test at Jysk Technologist inst.)
Max water pressure: 5,0 bar
Minimum water pressure: 3.0 bar
Water filter: Yes, QAC8 Activated carbon filter capacity 8000 liters
Weight: 19 kg
Temperature in coolers: adjusted to 2,5 c.
Air shield: Yes
Dimensions: W 24 cm – H 38 cm – D 40 cm with air shield 40 cm deep.
Power consumption: EU plug 230v Max consumption 250 watts 0,23Khw A++
Design by ZegoTech Aps, produced in the EU.
What needs to be ready before installation
The plinth (base) must be ventilated. All hot air blows down into the plinth (base).