Square surface faucet - touchless - Sparkling 70i

Surface Tap and Touchless

• Ø18 mm hole
• Table top max thickness 50 mm
• 6 mm JG hose with insulation (Ice water – boiling water and Sparkling water)
• Valve Box incl. power supply 12Vdc or (24Vdc Boiling water)
• The surface of the tap is lacquered. And does not tolerate solvents.
• Touchless sensor
• Touchless sensor hole Ø41 mm
• Table top max thickness 50 mm
• Valve Box incl. power supply 12Vdc

What needs to be ready before installation

• The plinth (base) must be ventilated. All hot air blows down into the plinth (base).
• Ventilated kitchen door, this system generates a lot of heat.
• Power: EU 230V female plug in the kitchen cabinet
• Water pipe: 3/4” female thread
• Kitchen cabinet base tray.
• We recommend a drain for condensed water.

• Cooler name: Sparkling 70i
• Item no: S70i
• Delivers: filtered chilled water.
• Delivers: filtered chilled sparkling water.
• Capacity: 2 x 70 liters per hour.
• Carbonate tank: 1,5 liters (Sparkling water)
• Compressor: 1/5 ”HP
• Cooling gas: R290
• Cooling method: Ice bank
• Safety valve: opens at 9 bar
• Noise: dB 76
• VA approved: Yes (Pressure test at Jysk Teknoligst inst.)
• Max water pressure: 6 bar
• Minimum water pressure: 3.0 bar
• Water filter: Yes, 4C Activated carbon filter capacity 13000 liters
• Weight: 38 kg
• CE: Yes
• Co2 pressure: 3.5 to 4.5 Bar
• Temperature in coolers: adjusted to 0,5 c.
• Condensation container: Yes, must be emptied daily. A pump can be fitted for drains.
• Air shield: Yes, incl fan.
• Dimensions: W 37 cm – H 51 cm – D 54 cm with air shield 54 cm deep.
• Power consumption: EU plug 230v Max consumption 490 watts
• Design by ZegoTech Aps, produced in the EU.